FLEX iO

19″ Rack solution

The FLEX iO encoder is a 19 inch 1U high system with two Ethernet connections. One for management purposes and one for connection with the public internet. The system supports both DHCP and fixed IP number configuration via the front LCD panel. The management interface is WEB based and makes it possible to configure maximum bitrate, video resolution and delay. Also the IP configuration can be done via the web interface.

Product Guide 2015

  • 1x Ethernet connection
  • Available in 1U
  • SDI input
  • Part of the WMT solution and utilizing the SDI playout system as the receiver
  • Automatic control of video encoding bandwidth based upon available bandwidth

  • INTERFACE

    • 2x Ethernet 10/100/1000 base-t
    • SD;SD- SDI,SD-HDMI, composite + 4x analog audio balanced
    • HD;HD- SDI,HD-HDMI
    • Jack IFB/Audio return
    • 4x USB
    • Touch panel

    VIDEO INPUT FORMATS

    • SD; full D1, Pal and NTSC mode
    • HD; 720p50, 720p60 and 720p59,94
    • HD; 1080i50, 1080i60 and 1080i59,94

    AUDIO ENCODING

    • ACC 44-128 kHz LFE

    HARDWARE

    • AC 220-110volt
    • Weighs approximately 2,5 kilograms
    • 43cm x 21cm x 4,5cm (W x D x H)
  • RECORDING

    • 40 Gigabyte (can be higher on request)
    • SD: High quality CBR in SD while broadcasting adaptive live stream
    • HD: High quality CBR in HD while broadcasting adaptive CIF live stream

    SUPPORTED VIDEO ENCODING

    • H.264 high profile MVP codec
    • Framerate 50, 60, 59,94

    IP MANAGEMENT NETWORK INTERFACE

    • 10/100/1000 base-T

    ADDITIONAL AVAILABLE ACCESSORIES

    • WiFi dongle

    INTERNET ACCESS

    • No WiFi Hotspot
    • Access via ethernet
  • OPERATIONS SETTINGS

    • Best quality: adaptive encoding and resolution change between full resolution, half and quarter resolution , with configurable delay of 2, 3, 5, 10 or 20 seconds.
    • Medium quality: adaptive encoding and resolution change between half and quarter resolution, with configurable delay of 2, 3, 5, 10 or 20 seconds.
    • Low quality: adaptive encoding and quarter resolution, with configurable delay of 2, 3, 5, 10 or 20 seconds.
    • Ka profile: adaptive encoding and resolution change between full resolution, half and quarter resolution but with optimized delay settings.
    • BGAN profile: adaptive encoding and resolution change between full resolution, half and quarter resolution but with optimized delay settings.
    • CPT: store and forward of recorded video with configurable delay between 45 seconds and 10 minutes.
    • Store and forward of any file content via USB or Ethernet
    • Audio only with 0.5 seconds delay

The solution can be delivered point to point or via a backend server. The backend server is available in two flavors. The basic backend Server can handle 2 FLEX iO encoders and 2 playout systems and store up to 25 hours of D1 video (depending on the hardware version). The premium server can handle 20 FLEX iO encoders and 20 playout systems and store up to 100 hours of D1 video (depending on the hardware version).